Options & Upgrades
- Domestic Water Preheater
- Anti-Scald Valve Package
- Prefabricated Hot Water Heating Package
- Summer Heat By-Pass Package
- Remote Pump Package
- Air Removal Kit
- Air Handler Package
- Unit Heater Package
- Duct Coil Support Package
- Pool Heater
- Super Saver Manual Pool Heating Package
- Stainless Steel Chimney Cap
Timber Ridge, Inc.
2020 Highway 11-E
Jonesborough, TN 37659
For Sales and Service
Toll Free: 1-866-966-3432
Phone: (423) 913-0515
Fax: (423) 913-1579
Send us an Email
Design Consultants Available: 9AM to 6PM (M-F)
Domestic Water Preheater
Acting as a domestic water pre-heater, the brazed plate heat exchanger kit is an easy and economical way to use your outside furnace to save on your domestic water heating bills. The more hot water you use, the more you get! This design is especially helpful for water heaters located in very tight spaces- places where the side-arm heat exchanger wont fit.
1 - 12" 3/4 x 3/4 FIP Flex Connector
1 - 18" 3/4 x 3/4 FIP Flex Connector
1 - 3/4" x 2" Brs Nipple
1 - 3/4" Push 'N Go Male Coupling
2 - 1" Swivel x 1" Barb Adaptor
6 - 1" PEX Crimp Ring
2 - 1" PEX Barb 90 Ell
$299.00
Prefabricated Hot Water Heating Package (Side Arm Heat Exchanger)
We build a custom package for you based on the dimensions of your water heater - all you need to do is screw it on. What you see in the photo is the completed assembly on a 40 gallon electric water heater. We can work with any kind of water heater, but the design may be different from that shown.
With this water-to-water heat exchanger you'll never run out of hot water as long as you have a fire in your FREE HEAT MACHINE.
49" 1-1/2" Copper Tubing
55" 3/4" Copper Tubing
1-1/2" x 3/4" x 1" Copper Tee
2 - 1" Female Copper x 1" PEX Barb Adapter
2 - 1" PEX Crimp Ring
2 - 3/4" x 3" Brass Nipples
2 - 3/4" Copper Tee
1 - 3/4" Bronze Boiler Drain
2 - 3/4" FTG x F STR Adapter
2 - 3/4" Copper Union
1 - 3/4" Copper 90 Ell
2 - 3/4" Copper x 3/4" Threaded Male Adapter
1 - 12" - 3/4" Copper Flex Connector
1 - 3/4" Copper x 3/4" Threaded Female Adapter
5' 1-5/8" ID x 1" Wall Closed Cell Insulation
5' 2" wide Closed Cell Insulation Tape
1 Labor to Prefabricate This Custom Assembly to Fit Existing Water Heater
$279.00
More Photos
*Water heater tank is not included. Design and material list subject to change based on hot water heater design.
Anti-Scald Valve Package
Since the domestic hot water heating package does such a good job of heating the water in your hot water tank, you will need to “temper” it before it gets to you or the “kiddies”.
2 - Push-N-Go x 3/4” Male Threaded Adaptor 1 - 3/4" Push-N-Go Tee
1 - Danfoss (TMV MR Series) Mixing / Anti-Scald Valve with 3/4” Compression Connections
1 - Danfoss Installation and Operation Instructions
1 - 3/4" PEX x 4-1/2” Pipe (Hot)
1 - 3/4" PEX x 4-1/4” Pipe (Cold)
1 - 3/4" PEX x 6” Pipe (Mix)
1 - Tube of pipe sealant paste
1 - 3/4" PEX x 15” Pipe (Extra – Not needed unless modification necessary)
1 - Labor to Prefabricate This Custom Assembly to Fit Existing Water Heater
$169.00
Optional (Not included in kit)
1 - Clamp-on temperature gauge 30F/240F range
More Photos
Shown: Anti-Scald Valve Assembly for Electric Domestic Water Heaters (ASSY-10032-1)
Also avalible for Gas Domestic Water Heaters (ASSY-10032-2)
Summer Heat By-Pass Package
For those of you who want to burn throughout the year to heat your domestic hot water, this is a must. The design allows you to bypass the duct coil in the summer.
3 - 1" Brs FP Thrd Ball Valve
2 - 1 x 3 Brass Nipple
2 - 1" x Close Brass Nipple
4 - PEX Barb x 1" MPT Adapter
2 - 1" Brass Tee
4 - Copper Strut Clamp w/hardware
8 - 1 5/8 x 1 5/8 x 10 14 Green H/Slot Strut
1 - Fabricated Crossover Base
$149.00
Remote Pump Package
Usually, we pre-mount the circulating pump on the furnace. But occasionally, design conditions call for the pump to be mounted remote from the furnace - usually at the lowest point of the system.
1 - Remote Pump Ball Valve/Drain Assy
1 - TACO 007 Circulator Pump
1 - Set of 1" Ductile Flanges for TACO Pumps
1 - 8' Electric Cord & Plug
1 - Fabricated Pump Base
$389.00
Air Removal Kit
This little package allows you to use your home's water supply to purge the hydronic system of air. Our experience has been that this is well worth the money.
1 - 3/4" x 3/4" Hose Swivel Adapter
2 - Rubber Washer
1 - 3/4" Bronze Boiler Drain
1 - 1" x 1" x 3/4" Threaded Brass Tee
2 - 1" PEX x 1" Male Adapter fittings
2 - 1" PEX Crimp Rings
1 - Labor to assemble and test
$39.00
Air Handler Package
This hydronic air handler is an attractive stand-alone appliance designed to connect to new ductwork or an optional filter box and directional hood.
Sizes and prices vary from $1,050 - $1,550
Unit Heater Package
This hydronic unit heater is great for localized areas with no dust. This unit heater is designed to hang from the ceiling on threaded rod. Simple installation.
Sizes and prices vary from $795 - $1,390
Pool Heater Package (With or Without Deck Box)
This Pool Heater Kit is designed for pools with surface area at or under 770 sq. ft. (18' x 30' for example) assuming that you want to keep the water temperature between 80F and 82F. (We can heat larger pools too - just ask.)
Pool heater kits are designed and packaged for fast installation and high capacity performance. Can be winterized and/or disconnected and removed when not in use.
The kit contains a stainless steel shell and tube heat exchanger, aquastat, 3-way diverter valve, 1-1/2" PVC ball valves (and additional components) mounted in an attractive deck box or on an easy to mount board.
(Important Note: Most heat loss is from evaporation, so always use a pool blanket for best results.)
770 Sq. Ft. Pool With Deck Box $2,897.00
Without Deck Box $2,397.00
Super Saver Manual Pool Heating Package
Extend your pool season with our 180,000 BTU manually controlled pool heater. This heater is easy to install, easy to operate, complete winterization kit available. Some of our customers heat their pool all year.
$999
Posts
No comments:
Post a Comment